Помогите разобраться не могу понять почему не компилирует тестовый проект выдает Код (Text): In file included from Parola_Scrolling.ino:15: C:\Program Files (x86)\Arduino\libraries\MD_Parola/MD_Parola.h:281: error: 'MD_MAX72XX' has not been declared C:\Program Files (x86)\Arduino\libraries\MD_Parola/MD_Parola.h:530: error: 'MD_MAX72XX' has not been declared C:\Program Files (x86)\Arduino\libraries\MD_Parola/MD_Parola.h:530: error: expected ',' or '...' before '*' token C:\Program Files (x86)\Arduino\libraries\MD_Parola/MD_Parola.h:559: error: ISO C++ forbids declaration of 'MD_MAX72XX' with no type C:\Program Files (x86)\Arduino\libraries\MD_Parola/MD_Parola.h:559: error: expected ';' before '*' token C:\Program Files (x86)\Arduino\libraries\MD_Parola/MD_Parola.h:608: error: 'MD_MAX72XX' has not been declared C:\Program Files (x86)\Arduino\libraries\MD_Parola/MD_Parola.h:608: error: ISO C++ forbids declaration of 'fontType_t' with no type C:\Program Files (x86)\Arduino\libraries\MD_Parola/MD_Parola.h:608: error: expected ';' before '*' token C:\Program Files (x86)\Arduino\libraries\MD_Parola/MD_Parola.h: In member function 'void MD_PZone::zoneClear()': C:\Program Files (x86)\Arduino\libraries\MD_Parola/MD_Parola.h:323: error: '_MX' was not declared in this scope C:\Program Files (x86)\Arduino\libraries\MD_Parola/MD_Parola.h:323: error: 'MD_MAX72XX' has not been declared C:\Program Files (x86)\Arduino\libraries\MD_Parola/MD_Parola.h: In member function 'void MD_PZone::setIntensity(uint8_t)': C:\Program Files (x86)\Arduino\libraries\MD_Parola/MD_Parola.h:419: error: '_MX' was not declared in this scope C:\Program Files (x86)\Arduino\libraries\MD_Parola/MD_Parola.h:419: error: 'MD_MAX72XX' has not been declared C:\Program Files (x86)\Arduino\libraries\MD_Parola/MD_Parola.h: In member function 'void MD_PZone::setZoneFont(int)': C:\Program Files (x86)\Arduino\libraries\MD_Parola/MD_Parola.h:530: error: '_fontDef' was not declared in this scope C:\Program Files (x86)\Arduino\libraries\MD_Parola/MD_Parola.h:530: error: 'fontDef' was not declared in this scope C:\Program Files (x86)\Arduino\libraries\MD_Parola/MD_Parola.h: At global scope: C:\Program Files (x86)\Arduino\libraries\MD_Parola/MD_Parola.h:1198: error: 'MD_MAX72XX' has not been declared C:\Program Files (x86)\Arduino\libraries\MD_Parola/MD_Parola.h:1198: error: expected ',' or '...' before '*' token C:\Program Files (x86)\Arduino\libraries\MD_Parola/MD_Parola.h:1211: error: 'MD_MAX72XX' has not been declared C:\Program Files (x86)\Arduino\libraries\MD_Parola/MD_Parola.h:1211: error: expected ',' or '...' before '*' token C:\Program Files (x86)\Arduino\libraries\MD_Parola/MD_Parola.h:1217: error: 'MD_MAX72XX' does not name a type C:\Program Files (x86)\Arduino\libraries\MD_Parola/MD_Parola.h: In member function 'void MD_Parola::setFont(int)': C:\Program Files (x86)\Arduino\libraries\MD_Parola/MD_Parola.h:1198: error: 'fontDef' was not declared in this scope C:\Program Files (x86)\Arduino\libraries\MD_Parola/MD_Parola.h: In member function 'void MD_Parola::setFont(uint8_t, int)': C:\Program Files (x86)\Arduino\libraries\MD_Parola/MD_Parola.h:1211: error: 'fontDef' was not declared in this scope
Вот Код (Text): // Program to exercise the MD_Parola library // // Demonstrates most of the functions of the Parola library. // All animations can be run and tested under user control. // // Speed for the display is controlled by a pot on SPEED_IN analog input. // Digital switches used for control of Justification, Effect progression, // Pause between animations, LED intensity, and invert mode. UI switches // are normally HIGH. // // Keyswitch library can be found at http://arduinocode.codeplex.com // #include <MD_Parola.h> #include <MD_MAX72xx.h> #include <MD_KeySwitch.h> // Define the number of devices we have in the chain and the hardware interface // NOTE: These pin numbers will probably not work with your hardware and may // need to be adapted #define MAX_DEVICES 8 #define CLK_PIN 13 #define DATA_PIN 11 #define CS_PIN 10 // HARDWARE SPI MD_Parola P = MD_Parola(CS_PIN, MAX_DEVICES); // SOFTWARE SPI //MD_Parola P = MD_Parola(DATA_PIN, CLK_PIN, CS_PIN, MAX_DEVICES); // Turn on debug statements to the serial output #define DEBUG_ENABLE 1 #if DEBUG_ENABLE #define DEBUG(s, x) { Serial.print(F(s)); Serial.print(x); } #define DEBUGS(x) Serial.print(F(x)) #define DEBUGX(x) Serial.println(x, HEX) #else #define DEBUG(s, x) #define DEBUGS(x) #define DEBUGX(x) #endif // User interface pin and switch definitions #define SPEED_IN A5 // control the speed with an external pot #define PAUSE_SET 4 // toggle pause time #define JUSTIFY_SET 6 // change the justification #define INTENSITY_SET 7 // change the intensity of the display #define EFFECT_SET 8 // change the effect #define INVERSE_SET 9 // set/reset the display to inverse #define PAUSE_TIME 1000 // in milliseconds #define SPEED_DEADBAND 5 // in analog units // Global variables uint8_t curString = 0; char *pc[] = { "Parola for", "Arduino", "LED Matrix", "Display" }; #define NEXT_STRING ((curString + 1) % ARRAY_SIZE(pc)) MD_KeySwitch uiJustify(JUSTIFY_SET); MD_KeySwitch uiEffect(EFFECT_SET); MD_KeySwitch uiPause(PAUSE_SET); MD_KeySwitch uiIntensity(INTENSITY_SET); MD_KeySwitch uiInverse(INVERSE_SET); void doUI(void) { // set the speed if it has changed { int16_t speed = map(analogRead(SPEED_IN), 0, 1023, 0, 100); if ((speed >= ((int16_t)P.getSpeed() + SPEED_DEADBAND)) || (speed <= ((int16_t)P.getSpeed() - SPEED_DEADBAND))) { P.setSpeed(speed); DEBUG("\nChanged speed to ", P.getSpeed()); } } // now process the digital inputs if (uiJustify.read()) // TEXT ALIGNMENT { static uint8_t curMode = 0; textPosition_t align = P.getTextAlignment(); textPosition_t textAlign[] = { LEFT, CENTER, RIGHT }; DEBUG("\nChanging alignment to ", curMode); P.setTextAlignment(textAlign[curMode]); P.displayReset(); curMode = (curMode + 1) % ARRAY_SIZE(textAlign); } if (uiEffect.read()) // EFFECT CHANGE { static uint8_t curFX = 0; textEffect_t effect[] = { PRINT, SLICE, WIPE, WIPE_CURSOR, OPENING, OPENING_CURSOR, CLOSING, CLOSING_CURSOR, BLINDS, DISSOLVE, SCROLL_UP, SCROLL_DOWN, SCROLL_LEFT, SCROLL_RIGHT, SCROLL_UP_LEFT, SCROLL_UP_RIGHT, SCROLL_DOWN_LEFT, SCROLL_DOWN_RIGHT, SCAN_HORIZ, SCAN_VERT, GROW_UP, GROW_DOWN, }; DEBUG("\nChanging effect to ", curFX); P.setTextEffect(effect[curFX], effect[curFX]); P.displayReset(); curFX = (curFX + 1) % ARRAY_SIZE(effect); } if (uiPause.read()) // PAUSE DELAY { DEBUGS("\nChanging pause"); if (P.getPause() <= P.getSpeed()) P.setPause(PAUSE_TIME); else P.setPause(0); } if (uiIntensity.read()) // INTENSITY { static uint8_t intensity = 7; intensity = ++intensity % 16; P.setIntensity(intensity); DEBUG("\nChanged intensity to ", intensity); } if (uiInverse.read()) // INVERSE { P.setInvert(!P.getInvert()); } } void setup(void) { #if DEBUG_ENABLE Serial.begin(57600); DEBUGS("[Parola Test]"); #endif // user interface switches uiJustify.begin(); uiEffect.begin(); uiPause.begin(); uiIntensity.begin(); uiInverse.begin(); // parola object P.begin(); P.displayText(pc[curString], CENTER, P.getSpeed(), PAUSE_TIME, PRINT, PRINT); curString = NEXT_STRING; } void loop(void) { doUI(); if (P.displayAnimate()) { P.setTextBuffer(pc[curString]); P.displayReset(); curString = NEXT_STRING; } }
Ошибка при сборке MD_Parola.h., она не видит декларацию класса MD_MAX72XX. А что если последовательность инклюдов поменять. #include <MD_MAX72xx.h> #include <MD_KeySwitch.h> #include <MD_Parola.h>
